Page 1 of 2 >>
enlarge
Barco RLM-W6 (678) 475-8095 | www.barco.com Barco’s RLM-W6 three-chip DLP projector provides WUXGA (1920 x 1200) resolution and 6,000 lumens of brightness. RLM Commander software allows control of the projector’s essential functions through a web interface.
enlarge
BenQ SP891 (949) 255-9500 | www.benq.us The BenQ SP891 features native full HD 1080p (1,920 x 1,080) resolution. Video input connections include HDMI, D-Sub 15 Pin Analog RGB, Component (RCA), S-Video and composite video. Brightness is 4,500 lumens.
enlarge
Boxlight MPWX70E 3 (360) 464-2119 | www.boxlight.com The MPWX70E 3 LCD projector from Boxlight features 4,200 lumens and five automatic functions: auto search, auto sync, auto ceiling, auto keystone and auto filter alert. The native resolution is WXGA (1,280 x 800) and the native aspect ratio is 16:10. A harsh environment filter is optional.
enlarge
Canon Realis WUX4000 www.usa.canon.com Canon’s Realis WUX4000 Installation LCoS Projector is a WUXGA (1,920 x 1,200) resolution unit with an aspect ratio of 16:10 and brightness level of 4,000 lumens. The projector employs Canon’s LCoS (Liquid Crystal on Silicon) optical engine and features HDMI connectivity.
enlarge
Christie LWU420 (714) 236-8610 | www.christiedigital.com The Christie LWU420 provides 4,200 lumens from a single lamp with a native resolution of 1,920 x 1,200 (WUXGA) and an aspect ratio of 16:10 with selectable aspect ratios of 16:9, 4:3 and 14:9. Display technology incorporates three inorganic LCDs, while connections include HDMI, HD 15, BNC, RCA and S-Video.
enlarge
Digital Projection E-Vision WXGA (770) 420-1350 | www.digitalprojection.com The dual-lamp Digital Projection E-Vision WXGA 600 employs Texas Instruments’ 1,280 x 800 dark metal DLP technology and delivers 6,000 lumens. The 44-pound projector features a single link DVI digital RGB input along with composite, component, S-video and progressive RGB and RGBHV inputs.
enlarge
Dukane ImagePro 9137WU-RJ (630) 584-2300 | www.dukane.com Dukane manufactures the ImagePro 9137WURJ 4,200 lumen WUXGA (1,920 x 1,200) LCD projector. Additional features include an HDMI port, top lamp access, side filter access and network capability.
enlarge
Eiki LC-WUL100 3LCD (800) 242-3454 | www.eiki.com Eiki’s LC-WUL100 3LCD projector features 5,000 lumens and native WUXGA resolution. The self-advancing cartridge air filter lasts up to 13,000 hours. Connectivity includes HDMI and DVI-D inputs.
enlarge
Epson PowerLite Pro G5450WUNL (800) 463-7766 | www.epson.com The PowerLite Pro G5450WUNL from Epson offers HD WUXGA (1,920 x 1,200) resolution and 4,000 lumens of output. The 3LCD G5450WUNL also features Epson’s C2Fine technology for improved image quality.
enlarge
Hitachi CP-WUX645N (800) 448-2244 | www.hitachi-america.us The Hitachi CP-WUX645N features 4,200 lumens and 1,920 x 1,200 (WUXGA) resolution. The projector also features auto signal search and HDMI, component, composite and S-video inputs and a side-mounted 2,000-hour hybrid filter.
enlarge
INFOCUS IN5304 (877) 388-8385 | www.infocus.com Featuring DLP DarkChip 3 technology the InFocus IN 5304 delivers a maximum brightness of 4,000 lumens and a WXGA (1,280 x 800) resolution. The “Blue Iris” glow ring indicates the power up or down status, and skin options (matte black, matte white, glossy black, walnut or pre-primed) enable blending with existing décor.
enlarge
LG BX401C (800) 897-8788 | www.lgsolutions.com LG’s BX401C DLP projector provides 4,000 lumens of brightness and XGA (1,024 x 768) native resolution. Features include advanced keystone correction, auto source detection and an on-board presentation timer. Input connections include an HDMI port.
A walk down any aisle at the InfoComm show, held recently in Orlando, Fla., revealed a dizzying array of video projectors of all shapes and sizes. With more than a few different imaging technologies (DPL, LCD, LED, LCoS) to choose from—each having its own strengths and weaknesses—the options can be overwhelming. Resolutions, aspect ratios, lumens, input connection options.... The list goes on and on, and trying to figure out what’s best for your needs can be more frustrating than herding cats.
Given the choices available, what are some of the vital features for installation projectors for a house of worship today? Bill Platt, president of Platt Design Group of Arcadia, Calif., says, “The developing trends for installation projectors are improved IP network control built into the projector, higher resolution, i.e., 1080P or greater, higher output lumens and contrast, better filter systems, and the new LED (no bulb) projectors.”
Platt also recommends that churches make certain their new projectors have the ability to handle new and different screen formats, offer networked projector control, and have the ability to accept digital inputs (DVI, HD-SDI) for better image quality. Image control-mapping for edge blending to solve keystone issues is the next feature Platt says should be high on a church’s list of preferred projector abilities.
He also suggests churches consider looking at short-throw projectors that can display a relatively large image with the projector positioned closer to the screen than standard projectors. Wi-Fi capability is also becoming popular. And further out on the horizon 3D and holographic technologies are being considered as solutions for multi-campus or video venue churches.
You say you want some resolution?
As technology marches on, common goals for all manufacturers include improving image quality, and reducing the total cost of ownership or TOC. When considering a projector purchase, it’s always important to consider TOC, which includes items such as frequency and cost of replacement lamps, filters, and the overall energy efficiency of the projector, as well as any service or maintenance required during the projector’s lifespan.
While the improvements might seem purely technological on the surface, they do provide a measure of value to churches looking to upgrade their existing systems or to start employing projection to support worship. As Platt says, “The advancements in higher-lumen, greater-resolution projectors for lower cost are the best advancements for the house-of-worship projector marketplace.” And that relates directly to the ability to use projection in a greater variety of situations—from high ambient light situations, to better flexibility in projector placement relative to screens.
What follows is a listing of projectors intended for installation that provide 4,000 lumens or more of brightness. You can visit the manufacturers’ websites for more detailed information, but we recommend you get the assistance of a professional to help determine the best possible projector for your application.
Page 1 of 2 next page >>
Mark Johnson is an independent technical trainer/writer based in Crockett, Calif., and former editor of Sound & Video Contractor and Church Production magazines. He can be reached at mjohnson6286@sbcglobal.net.
Post a Comment
ADD NEW COMMENT