In the shadow of majestic Mount Rainier, Experience Church is a non-denominational Christian church with a 500-seat sanctuary. Installed more than 15 years ago, the church’s sound system was showing its age and in need of an update. Uncertain of the cost and in need of ideas, the church contacted Sumner, Washington-based McCauley Systems for advice and consultation.
“I’ve had a long-standing relationship with this church, having designed and consulted on the original sound system about 15 years ago,” says McCauley Systems principal Ryan McCauley. “Fundamentally the system is still in good shape, with excellent coverage and impact, but many of the loudspeaker components in particular were approaching the end of their useful lives, and some of the amplification and other electronics were beginning to fail.”
With the ongoing uncertainty surrounding the pandemic, budgets were also a concern. “Since I’d designed the original system, I suggested refurbishing that system rather than replacing it,” McCauley continues. “With the advancements in loudspeaker technology, we were able to not only replace the failing components, but update them with more modern versions, far superior in performance and sound quality. Perhaps, even more significant, have been the advancements in DSP and amplifier technology. What was state-of-the-art 15 years ago has been vastly surpassed by today’s technology, larger per channel power, advanced DSP, and FIR signal processing capabilities,” states McCauley.
The existing line array cabinets – left and right hangs comprising eight dual-8-inch cabinets per side – have been refitted with custom designed OEM loudspeakers from RMS-Acoustics, and the rack of amplifiers have been replaced with four Linea Research 44C Series 4-channel Networked DSP amplifiers.
“The Linea amps are immensely powerful and quite simply sound amazing,” states McCauley. “We were able to replace an entire rack of 16 amps with just four Linea units, two 44C20 and two 44C10, which cuts down on both heat and rack real estate.”
The 44C20 amplifier delivers 4 channels of 5000W/ch into 2 ohms, while the 44C10 offers 4x 2500W/ch. All C Series amplifiers offer integrated 96kHz DSP and network control as standard, including FIR filters on every output, in addition to the more traditional EQ and DSP processing and an optional Dante interface.
“In addition to the obvious hardware improvements with loudspeaker components and amplification, we also upgraded their signal chain to include a Dante digital audio network,” continues McCauley. “They now have a dual redundant, primary/secondary Dante network between the console, amplifiers, and personal mixer system, improving both dependability and sound quality compared to their previous analog system.”
