Sometimes the most impressive thing about a great bass player is how little work they create for the audio engineer. Photo by Jaden Hatch, courtesy of Unsplash.
If you’re familiar with my content, you know I’m a big believer in getting the sound right at the source.
That applies to singers, drummers, choirs, pastors with headset mics, guitar players, and yes, bass players. Our job as audio engineers is to do the best we can with the signal we’re given. But the cleaner and more usable that signal is before it gets to the console, the better everything goes.
Of course, if you’re going to speak into a team member’s tone, technique, or gear, you need some earned relational equity. Nobody wants the audio guy walking onto the platform acting like he’s been sent there to straighten everyone out once and for all.
“Lemme tell y’all how we do it in Nashville” is probably not the best opening line to earn the team’s trust.
“Lemme tell y’all how we do it in Nashville” is probably not the best opening line to earn the team’s trust. These conversations go much better when trust has already been established.
Today, I’d like to share some thoughts about, and with, our bass players.
Bass players can be overlooked, buried in the mix, or treated as an afterthought. That’s a mistake. A good bass player can change the entire feel of the day. As much pressure as I put on drummers, it could be argued that a great bass player can help elevate a drummer more than a great drummer can rescue a mediocre bass player. Sometimes I wonder if bass gets buried in Sunday mixes because the tone simply isn’t fitting with the rest of the band, and it’s simply easier to turn it down than figure out why.
Many years ago, I was on a commissioning team for a church opening its first building. They were moving from a very small auditorium with a cobbled-together PA system into their first professional worship environment. For them, it was like going from a beat-up used car to a world-class luxury import. Exciting, but also a pretty steep learning curve.
My job was to train the audio team and, with the encouragement of church leadership, help the worship team establish some standards and best practices. Everyone was excited about this new chapter in the worship ministry. The team was willing, teachable, and grateful.
Well, almost everyone.
There was a young bass player, we’ll call him Luke. Luke was pretty entrenched in his way of doing things. Even though the church had purchased new equipment, including a proper active direct box for bass, Luke insisted on using his own pedalboard/direct box combo.
I wanted to keep an open mind, so I didn’t make an issue of it right away. After all, that’s what noise gates are for, right? But I had doubts about how his rig was going to translate through the new system.
Soundcheck started, and it didn’t take long.
Luke’s bass rig sounded terrible. And I don’t mean “terrible to my golden professional audio engineering ears.” I mean objectively terrible. Distorted, noisy, uneven, and simply bad. There was no fixing this at the console. Young Skywalker had effectively spilled a huge bowl of pasta with meat sauce in the front seat of our brand-new car.
What feels like the perfect amount of overdrive in a practice environment might sound completely different when it is sent through the PA.
With the church’s team leader alongside me, we approached Luke and asked him to bypass his board and plug into the new active direct box. I explained that even if his tone sounded good to him in his ears, and that was a big if, it was not working in the house mix. We needed a cleaner bass sound at the source, and he might actually like the result.
Luke was not happy.
“Well, ok, if you want it to sound like crap, I guess so,” was his response. I’m pretty sure “crap” wasn’t the word, but you get the idea.
I don’t think Luke was trying to be difficult just for the sake of being difficult. He had lived and played bass in a pretty small bubble. He had built his tone at home in headphones, and prior to this day, through PA systems made up of recycled garage and bar band equipment. He simply had not heard his sound through a good system that revealed everything he was putting into it.
Garbage in, garbage out.
I don’t tell this story to pick on Luke. It’s an extreme example of something many bass players experience. Unless you’ve had the time, the opportunity, and some very long cables, there’s a good chance you haven’t really heard what your bass sounds like in the house mix.
On the opposite end of the spectrum, I spent a season at a church where the main bassist was a former country touring player. He never added extra sauce to his sound. No unnecessary pedals. No drama. Just a great bass into a quality active direct box.
During soundcheck, when it was his turn, he would play a few notes and I would cut him off and say, “We’re good, let’s move on.”
The joke, and the reality, was that Tony’s bass tone was perfect. Smooth, punchy, consistent, and a soundman’s dream. There was no need to fool around when all I had to do was push up the fader and try not to ruin an already great sound. It didn’t hurt that Tony had incredibly consistent technique, great timing, and that elusive almost unteachable quality… feel.
I really miss working with Tony.
The reality in the church world is that most bass players fall somewhere between Luke and Tony when it comes to their tone.
The most common problem I’ve encountered is the pedalboard.
I’m not against bass pedalboards. There are excellent bass players who know exactly how to use pedals in a way that supports the song and translates well through a PA. A little distortion, often called dirt, grit, or edge, can be great. Some arrangements need it. Some songs come alive with it.
The problem is when that sound is built in isolation. Most bass players design their sound through a small amp at home, headphones, or in-ear monitors. They rarely hear that same tone through the actual auditorium system. What feels like the perfect amount of overdrive in a practice environment might sound completely different when it is sent through the PA.
Unless you’ve had the time, the opportunity, and some very long cables, there’s a good chance you haven’t really heard what your bass sounds like in the house mix.
Once that signal reaches the audio engineer, the tone and grit are already baked in.
If the bass is distorted, noisy, or over-processed before it gets to the console, the engineer cannot simply dial that back out. We can EQ it. We can compress it. We can turn it down. We can try to tuck it into the mix. But….
We cannot turn a dirty signal back into a clean one.
It’s like baking a cake with way too much sugar. You can scrape off some icing, but the cake itself is still the problem.
A better solution is to send a clean, unaffected bass signal to the mixer. With almost all modern digital consoles, it’s easy for the engineer to double-patch the bass into two separate channels. One channel can stay clean and pure. The other can have the appropriate amount of edge, grit, or saturation added for the song.
I spent a long season mixing broadcast for a church where we did exactly that. We always had the bass double-patched, with one clean channel and one dirty channel. The dirty channel used onboard overdrive, and we added it to taste depending on the song. That gave us flexibility without losing the clean foundation. Some days, the dirty channel went unused when the songs didn’t call for it.
Similarly, some bass players also have gear that allows them to send two distinct channels themselves: one clean and one dirty. Think of it as sending the cake on one channel and extra frosting on the side on an adjacent channel. In that case, the bass player is not only giving the engineer a clean signal, but also providing the dirty sound they actually created, instead of leaving the engineer to craft it from scratch. That can be a great setup, as long as the clean signal is really clean and the dirty signal is actually usable in the mix. When in doubt, just send one clean signal.
No one has ever walked away from a church service saying, “I really could have gotten to the throne if that bass player sounded more like John Entwistle.”
There certainly are amazing bass players who intuitively understand how to build a sound that translates well into almost any system. They know how to use pedals tastefully. They understand dynamics. They know when to play more and when to play less. They know how to support the song without turning the bass into the main attraction. But in church environments, those folks are rare.
If you’re a bass player and you’re not completely sure whether your tone is translating well, I would encourage you to be like Tony. Simplify your setup. Send a clean signal. Use good cables. Use a good direct box. Make sure your level is consistent. And work with your audio engineer.
Audio engineers need to be careful here too. Don’t treat bass players like they are a problem to solve. They are musicians. They have preferences. They have opinions. They have gear they love. Some of them have spent years developing their sound. If you want them to trust you, you have to earn that trust.
But bass players, we need your partnership on this one.
Give us a clean, solid foundation. Give us something we can work with. Give us a good basic cake, and if the song needs it, we’ll add the right amount of icing.

