The new Encore Lime Par Series of IP65-rated LED wash fixtures from ADJ feature quad color (RGB + lime) LEDs designed for brightness with a high CRI. Created for a life on the road, these fixtures are IP-rated for concert, theater, and event productions, both in and outdoors.
Three models are available: Encore LP7IP, Encore LP12IP and Encore LP18IP, with 7, 12 and 18 LEDs respectively. “Each LED is rated at 20-Watts and combined in multiples they generate a potent output with an even, soft-edged beam. Through precise dimming control over the four primary LED colors – red, green, blue and lime – the fixtures are able to generate a large gamut of colors and hues. The inclusion of the lime LED chip helps certain colors to appear more vivid and also boosts the CRI to an impress 86.2,” the announcement states.
In addition to full RGBL color mixing control, the fixtures feature 64 built-in color macros, 5 preset white color temperatures and linear color temperature control (between 2700K and 6500K) to aid with setup and programming. They offer adjustable refresh rate (14 presets between 900 and 25,000Hz) for flicker free operation when used for video recording and broadcast as well as 6 selectable dimming modes (Standard, Stage, TV, Architectural, Theatre & Stage 2) and 4 selectable dimming curves (Linear, Square, Inverse Square & S-Curve).
All of the Encore Lime Par Series fixtures offer a 10-degree native beam angle, designed for a punchy output of vibrant color. However, each unit is also supplied with a 25-degree frost filter, which clips and locks over the LEDs, allowing the beam angle to be enlarged for applications where a wider wash of light is required. In addition, a collection of additional lenses is also available for each model as optional accessories. 20, 60 and 100-degree frost filters are available, as well as two LSF (Light Shaping Filter) options: 30x60-degrees and 1x40-degrees. Dedicated barn door accessories are also available for all three models, which attach to the front.
Featuring IP65-rated enclosures, the Encore Lime Pars are specifically designed for temporary outdoor use. Their sealed design means that their LEDs and internal electronics are protected from liquid, dust, and moisture for use on outdoor stages and for outdoor event illumination, but also for use indoors, with protection from split drinks, dust/debris, and smoke/haze residue. All three models feature aluminum construction with a black powder coated finish and tempered glass covering the LEDs. They are supplied with heavy duty dual yokes, which lock into place on both sides with bar handles and can be used either as floor stands or hanging brackets.
All three fixtures offer a choice of DMX channel modes to suit the needs of different applications. A menu interface for DMX addressing and mode selection is facilitated through a 16-character backlit LCD display on the rear of each unit. The menu is navigated via four push buttons and is designed to make setup and alteration of operating parameters quick and easy. The units feature IP65-rated 5-pin DMX input and output sockets as well as locking power input and output connections, which allows for the power supply for multiple fixtures to be connected to a single outlet. These sockets all feature rubber caps to offer protection from moisture and particulates when not in operation.
Large heat sinks allow the noise created by the fixtures’ cooling fans to be kept to a minimum, while a Quiet Fan mode reduces this further for theatrical applications which demand near silent operation. These pars are transportable, with weights ranging from 7.5 lbs. / 3.45 kg. [LP7IP] to 16 lbs. / 7.15 kg. [LP18IP]. They also have compact dimensions, measuring: 8.65” x 6.5” x 9.5” (L x W x H) / 220 x 160 x 242mm [LP7IP], 10.5” x 8” x 11” / 262 x 200 x 274mm [LP12IP] and 11.85” x 9.25” x 11.5” / 300 x 234 x 289mm [LP18IP].
“The Encore Lime Par Series expands both ADJ’s Encore range of stage lighting fixtures and our portfolio of ‘all weather’ IP-rated equipment,” comments ADJ USA’s National Sales Manager, Alfred Gonzales. “Complementing the existing IP65 LED pars in our catalog, these new fixtures offer exceptional output and high CRI, which makes them ideal for illuminating stages. Their tight 10-degree beam angle is perfect for long throw applications, while the included diffusion filter and range of additional beam shaping accessories make them truly versatile lighting tools.”
The Encore Lime Par Series builds on ADJ’s existing line of HEX IP wash fixtures, which has been in the market for four years. These IP65-rated LED pars featuring RGBWA+UV LEDs are used with rental houses and production companies alike. The addition of the Encore Lime Par Series alongside the current HEX IP series provides lighting professionals two complementary options for color washing, both with the same IP65-rated enclosure design.
The Encore Lime Par Series is available now from both ADJ USA and ADJ Europe.
To find out more about the ADJ Encore Lime Par Series, visit:
Encore LP7IP: https://www.adj.com/encore-lp7ip
Encore LP12IP: https://www.adj.com/encore-lp12ip
Encore LP18IP: https://www.adj.com/encore-lp18ip
For more information contact ADJ:
ADJ USA - Tel: 800-322-6337/+1-323-582-2650 • info@adj.com
ADJ Europe - Tel: +31 (0)45 546 85 00 • info@adj.eu
ADJ Mexico - Tel: +52 (728) 282 7070 • ventas@adj.com
Web: www.adj.com
